beautypg.com

2 matrix hardware, 3 fonts, Matrix hardware – Clear-Com HX System Frames User Manual

Page 71: Fonts

background image

Menu

Highlighted when …

Beltpacks

There are antennas but no beltpacks

Panels

There are key groups which do not have
members
There are configured panels but no configured
keys

Controls

There are speed dials but no controls.

Table 5-1 Highlighted configuration issues

5.2

Matrix hardware

The Hardware menu is utilized to build up the configuration of the Eclipse HX system.

The Eclipse HX system combines hardware items with port functions. Hardware items may
include configuration cards, interface cards, ports (panels or Interfaces) and RLY-6/GPI-6
modules. Port functions also use this link and provides access to the advanced settings for
ports and also where local preferences are configured.

Note:

To build a configuration, at least one MVX-A16 or IVC-32 card must be configured in an
Eclipse HX-Omega, Eclipse HX-Median or Eclipse HX-Delta matrix. If no cards are fitted,
the first available slot should be configured in EHX as if an MVX-A16 card was present in
order for the map to build.

5.3

Fonts

A number of fonts are supported by Eclipse HX systems allowing suitable panels to display
labels in Latin and certain non-Latin scripts. The fonts supported by Eclipse HX systems
are described below with the panel support.

Eclipse HX v7.5 has additional font support for the V-Series panels:

Basic Latin. The backslash is a Yen character. This is a size-maximized font (no

descenders, lower-case characters are not relative in size to upper-case
characters). This covers Unicode 32 to 127 (decimal), 0x20 to 0x7F (hex). The V-
Series panel display supports ten characters.

Cyrillic. This is a normal, relatively-sized font. The V-Series panel display

supports ten characters. Covers Unicode 1024 to 1279 (decimal), 0x400 to 0x4FF
(hex) with some missing characters.

Hiragana. The V-Series panel display supports five characters. This covers the

codepoint range 12352 to 12447 (decimal), 0x3040 to 0x309F (hex).

Full-width Katakana. The V-Series panel display supports five characters as this

is a normal wide font. This covers the codepoint range 12448 to 12543 (decimal),
0x30A0 to 0x30FF (hex) with some missing characters.

Kanji. There are about 17,000 out of the 21,000 characters. The V-Series panel

display supports five characters. This covers the codepoint range 19968 to 40895
(decimal), 0x4E00 to 0x9FBF (hex).

Hangul. The V-Series panel display supports five characters, codepoint range is

44032 to 55215 (decimal), 0xAC00 to 0xD7AF (hex).

Half-width katakana. The V-Series panel supports ten characters. The codepoint

range is 65376 to 65440 (decimal), 0xFF60 to 0xFFA0 (hex).

71

Eclipse EHX Software User Guide