2 properties, Controls basic options, Global options – Clear-Com HX System Frames User Manual
Page 151: Soft mode options, Properties
1)
To delete a Control, highlight the Control from the Control Viewer window then
select Delete.
5.51.2
Properties
The Properties window allows the user to edit the Control’s Basic Settings, Global Settings
and Soft Mode Options.
Controls basic options
Basic Options displays the fixed information about a Control and can be used to edit the
Control description, Talk and Listen Aliases and Talk and Listen labels.
To enable/disable Basic Options:
1)
Open the Control Manager screen by selecting the Controls link on the
Configuration menu
2)
Create a Control or select a Control that was been previously created
3)
Expand Basic Options in the Properties window.
4)
Update the settings as required.
Global options
To enable/disable Global Options
1)
Open the Control Manager screen by selecting the Controls link on the
Configuration menu
2)
Create a Control or select a Control that was been previously created
3)
Expand the Global Options in the Properties window.
4)
Select Latch Disable in the Global Settings list.
5)
Select the drop down arrow and select the required status.
Soft mode options
The Soft Mode Options list display items which relate to the Soft Mode available on
certain panel types. Currently this is restricted to Sort Groups.
To enable/disable Soft Mode Options
1)
Open the Control Manager screen by selecting the Controls link on the
Configuration menu
2)
Create a Control or select a Control that was been previously created
3)
Expand Soft Mode Options in the Properties window.
151
Eclipse EHX Software User Guide