Clear-Com HX System Frames - Manual (Page 29)

Note: If you import a .ccn file, remember to save your imported project as an
*.hxn
format file.
2.2.5 Running EHX
Logging into EHX
To log into EHX in Client-only mode (EHX is run on a single machine, without connecting
to a server):
1) From the Windows Start menu, select Programs / All Programs > Clear-Com >
Eclipse HX Configuration Software. The EHX user login screen is displayed
(see below). If you are logging in for the first time, the default username
(Administrator) is already entered for you. No password is required on initial login
Figure 2-1 EHX Login Screen
2) Click OK.
When logged in to EHX, you can use the User Management facility to change the
password for the default user and add further users (see 3 EHX: setting up a system).
The default user has EHX administrator privileges.
Note: If you are running EHX in Client-Server mode, you must first enter the address of the
remote server to log into (see Client-Server Login below).
Client-Server Login
If you are running EHX in Client-Server mode, you must enter the address of the remote
server before logging in.
To log into EHX in Client-Server mode:
1) From the Windows Start menu, select Programs / All Programs > Clear-Com >
Eclipse HX Configuration Software. The EHX user login screen is displayed
(see below). If you are logging in for the first time, the default username
(Administrator) is already entered for you. No password is required on initial login.
29 Eclipse EHX Software User Guide