beautypg.com

Panel menu access code, Features passcode, Wireless beltpacks – Clear-Com HX System Frames User Manual

Page 49

background image

Figure 3-20 Example DTMF Passcodes

Panel Menu Access Code

You can PIN-code protect the menus on V-Series main panels. Enter the PIN code here.
When users attempt to access PIN-protected menus they must enter this code.

The PIN protected menus on V-Series panels are:

• Sys Config Access
• Local Pref Menu access
• Diagnostic Menu Access

Features Passcode

You can enter a 16 digit passcode to enable Production Maestro to operate with the
matrix.

This passcode is purchased / obtained from Clear-Com. For more information, see your
Clear-Com representative.

Note:

If the passcode is changed an apply and red reset is required to implement the change.

Wireless beltpacks

Use this tab to configure the system identifier and DECT parameters for CellCom /
FreeSpeak wireless beltpacks.

A password is required to access the DECT configuration facility. For more information,
contact your Clear-Com representative.

Figure 3-21 Wireless Beltpacks Tab

49

Eclipse EHX Software User Guide