Clear-Com HX System Frames - Manual (Page 200)

7.4.4 Copy
1) Select Copy on the Panel Programming toolbar to copy the labels of the current
panel page only into the scratch pad.
7.4.5 Paste
1) Select Paste on the Panel Programming toolbar to paste the labels copied to the
scratch pad onto the currently selected panel. All the labels currently on the page
are lost. This allows single pages of labels to be pasted on to the panel.
If the type of panel being pasted to is not the same as the type of panel the labels
were copied from this may result in labels being lost when the labels are pasted
onto the new panel.
7.4.6 Clear
1) Select Clear on the Panel Programming toolbar to clear all the labels from the
current panel including shift pages. Audio Mixer.
7.4.7 Audio mixer
1) Select Audio Mixer to display the audio mixer panel that allows the levels of
individual crosspoints to be adjusted interactively. This facility can only be used
with V-Series panels. See 7 Panel programming for details of the Audio Mixer.
7.4.8 Identify panel
1) Select the Identify Panel button on the panel programming toolbar to cause the
panel currently being edited to flash the panel buttons or LEDs red and display
IDENTIFYME
in the bottom left display. This facility is only available for V-Series
panels. The Identify Panel button is greyed out for other panel types.
200 Eclipse EHX Software User Guide