Clear-Com HX System Frames - Manual (Page 229)

8.2.7 Crosspoints
The crosspoint area of the audio mixer displays all the crosspoints available for the current
configuration and the status of the crosspoint.
Each crosspoint allows individual setting of the input and output audio between the audio
source in the input section and the Asia destination in the output section. Each crosspoint
is displayed as a dial with color coding to show the status of the crosspoint. The color
codes are:
• Grey - crosspoint is muted so no audio passes through the crosspoint.
• Blue - audio level gain is set to 0dB or controlled by a volume knob.
• Green - audio level is reduced in the crosspoint (gain level is negative for
example, -3dB).
• Red - audio level is increased in the crosspoint (gain level is positive for example,
+3dB).
• Blank - no crosspoint.
The center of the dial is also color coded when appropriate to indicate whether the audio
level is being controlled by software only or by the panel volume controls. The settings are:
No colored center - audio levels are set in software only.
White center - audio level is set by main volume control knob.
Mauve center - audio level is set by auxiliary volume control knob.
Figure 8-8 Audio Mixer Crosspoint
Right clicking on a crosspoint dial displays a list of options for setting the crosspoint.
229 Eclipse EHX Software User Guide