1 fiber trunking, Fiber trunking – Clear-Com HX System Frames User Manual
Page 243
10.2.1
Fiber trunking
To enable fiber trunking, you must install and configure E-FIB fiber cards in the matrices
you want to connect.
Fiber trunked matrix matrices are normally connected in a ring configuration. An example
connection layout (the IP addresses increment to match the system numbers) is shown
below.
Figure 10-5 Fiber Connections
An example of matrices with trunks is shown below.
Figure 10-6 Trunk Connections
243
Eclipse EHX Software User Guide
This manual is related to the following products: