Clear-Com HX System Frames - Manual (Page 186)

3) Click on the talk section for a talk key. Click on the listen section for a listen key
Unlike the lever key panels only one label can be assigned to a key rather than
two, but key activation can be assigned unlike lever key panels.
4) Position the mouse pointer over a key display/label to display the details of the
label.
Figure 7-9 V-Series Pushbutton Assignment
5) To display the action menu for a key, position the pointer over the label and right-
click the mouse.
Figure 7-10 Pushbutton Properties Menu
Local assignment
1) Click the Local Assignment entry to display the available options for local key
assignment. The options are to allow local key assignment to overwrite the
selected key or to disallow local key assignment to overwrite the selected key.
This permits the system administrator to limit the keys a panel operator can
overwrite when locally assigning keys by Fast Key Assign (V-Series only) or by
Local Key Assignment (on panels supporting this facility).
Interlock group
You can assign several keys on a panel into a selector group and restrict the group so that
only one key of the group can be activate at any one time. This function only refers to talk
paths.
For example if a panel had five keys programmed to talk to cameras 1 to 5 then by setting
these into an interlocked group only one camera key can be selected at a time.
There are nine available interlocked groups to which the EHX user can assign any or all
panel keys.
The interlock groups are specific to the panel they are programmed for and do not affect
interlock groups that may be set up on any other panel in the system.
To add a key to an interlocked group:
1) From Panel Programming, select the desired panel.
2) Right click on the desired key to display the key options list.
3) Select the Interlock Group entry to display the interlock group options list.
186 Eclipse EHX Software User Guide