Clear-Com HX System Frames - Manual (Page 143)

• Listen Label - the Listen label for the partyline.
• Talk Alt Text – the alternative text for the talk label.
• Talk Label - the Talk label for the partyline.
5.48.3 Partyline global options
To enable/disable Global Options
1) Open the partyline screen by selecting the Partylines link on the Configuration
menu
2) Create a partyline or select a partyline that was been previously created
3) Expand Global Options in the Properties window.
The Global Options are:
• Auto Listen
• Dial Code
• Global Partyline Number
• Latch Disable
• Prevent Reply Signalization
5.48.4 Partyline fast key assign options
To enable/disable Soft Mode Options
1) Open the partyline screen by selecting the partylines link on the Configuration
menu
2) Create a partyline or select a partyline that was been previously created
3) Expand Fast Key Assign Options in the Properties window.
4) Select the required options:
• Default Assign as Talk and Forced Listen. When true the default for a key
assigned to this label is Talk and Forced Listen.
• Enable Assignment as Listen. This must be enabled to allow a V-Series panel
operator to assign a listen key to this label. If it is not enabled a V-Series panel
operator cannot assign a listen key to the label.
• Enable Assignment as Talk. This must be enabled to allow a V-Series panel
operator to assign a talk key to this label. If it is not enabled a V-Series panel
operator cannot assign a talk key to the label.
• Protect Port from Assignment. When this option is enabled the port cannot be
locally assigned as a talk/listen key by another panel.
5) Select the drop down arrow and select the required status.
143 Eclipse EHX Software User Guide