Clear-Com HX System Frames - Manual (Page 158)

6) Click the Register Beltpacks button to register a beltpack. A list of instructions to
register a beltpack is displayed.
7) When the beltpack has been powered up and connected click on the Register
button. A confirmation screen is displayed when the beltpack has been registered.
If the beltpack cannot be registered an error message is displayed.
Note: The Associated Role field can be edited by positioning the cursor in the box and editing
the text in the normal way. A description of the beltpack can be added in the Description
column.
5.53.1 Beltpack properties
To set the properties for the beltpack open the required options in the Properties window
(top right).
Basic options
Associated role
Select a role from the list of available beltpack roles set up using the Beltpack Roles
facility.
Description
Enter an optional description for the beltpack such as user or department.
Engineer comments
A scratchpad for engineers to record any relevant information about the beltpack.
Listen label
The Listen label that is available for panel configuration (a combined Talk/Listen label is
shown unless the option for 10 character labels is turned off).
Power up state
This defines whether the beltpack role is set to a preferred role or a fixed role when it is
powered up.
Serial number
The beltpack serial number. This field is non-editable.
Talk label
The Talk label specified for use in the panel configuration table (a combined Talk/Listen
label is shown unless the option for 10 character labels is turned off).
5.53.2 Beltpack roles
Beltpack roles define the beltpack in the same way as a label defines a key on a panel so
that assigning a role to a beltpack has the effect of creating a label for it that can be
referenced by other devices in the system such as a panel. The Beltpack Roles screen is
only available if an antenna or splitter card has been configured in the matrix.
1) To create and edit beltpack roles select the Beltpack Roles entry in the Setup
menu to display the beltpack roles editor.
158 Eclipse EHX Software User Guide