beautypg.com

5 configuring the eclipse hx system, 1 using the left pane ehx menus, Configuring the eclipse hx system – Clear-Com HX System Frames User Manual

Page 70: Using the left pane ehx menus, 5configuring the eclipse hx system

background image

5

Configuring the Eclipse HX system

5.1

Using the left pane EHX menus

The EHX menus in the Menu (left hand) pane are used to configure and manage your
Eclipse HX system devices, including:

• Matrices (Eclipse HX-Omega, Eclipse HX-Median, Eclipse HX-Delta and Eclipse

HX-PiCo)

• Matrix hardware ports and interface cards (including MVX-A16 analog port cards,

E-QUE E1/T1 cards, IVC-32 IP cards, LMC-64 metering cards, E-FIB fiber cards,
and E-MADI64 cards).

• Interface frames (such as the IMF-3) and modules (such as the TEL-14, FOR-22,

CCI-22, RLY-6, and GPI-6 modules).

• User panels (V-Series and I-Series).
• Two-wire and four-wire intercom systems.
• Wireless intercom systems (such as CellCom / FreeSpeak).

You can use the EHX menus to set up and manage partylines, Sort Groups, Key Groups,
routes, speed dials, wireless beltpacks and beltpack roles, and configure GPIs and GPOs,
as well as many other tasks.

Figure 5-1 Eclipse HX Main Menu

Various menu items may be highlighted

amber

to indicate possible configuration issues:

Menu

Highlighted when …

System

There is an open project, but not an open
configuration.
There is an open configuration but the matrix
type is not set.
There are multiple matrices in the system but
the fiber ring is judged to be incorrect.

Cards and Ports

There are no ports configured for a particular
matrix.

IP Devices

There are IP cards which do not have any
available ports

70

Eclipse EHX Software User Guide