Clear-Com HX System Frames User Manual
Page 170
• DHCP Enabled - whether the panel should obtain an address from a DHCP
server or use a preset address.
• Connection - the type of connection: WAN, LAN or Internet.
• IP Address - the IP address of the panel.
• Netmask - the subnet mask for the network the panel is on.
• Gateway - the IP address of the gateway to be used when connecting to the
matrix.
• DNS - the IP address of the Domain Name Server to be used by the panel to
obtain an IP address automatically if DHCP is enabled.
6)
Click Edit to enable the IP settings to be changed from IP Devices.
Figure 6-8 Editing IP Panel Settings
7)
When the edits are completed click on the tick button to accept the changes or the
cross button to cancel the changes.
If a parameter is set to an invalid state, such as part of an IP address being set to a
number greater than 255 the error is flagged by a red border around the item when
attempting to save it. The invalid entry is not sent to the panel and the entry is reset to the
original value if edit mode is cancelled.
Figure 6-9 Panel Setting Error in Edit Mode
Note:
Care should be taken when making some changes as they may prevent the panel from
logging in to the IVC-32 card, for example by changing the login IP or login port.
170
Eclipse EHX Software User Guide