Gl.srie, Gl.giorr – Rainbow Electronics DS3170 User Manual
Page 132
DS3170 DS3/E3 Single-Chip Transceiver
132 of 233
Register Name:
GL.SRIE
Register Description:
Global Status Register Interrupt Enable
Register Address:
018h
Bit
# 15 14 13 12 11 10 9 8
Name
-- -- -- -- -- -- -- --
Default
0 0 0 0 0 0 0 0
Bit
# 7 6 5 4 3 2 1 0
Name
-- -- -- -- --
ONESIE
CLOLIE
GPMSIE
Default
0 0 0 0 0 0 0 0
Bit 2: One Second Interrupt Enable (ONESIE) This bit will drive the interrupt pin low if the
.ONESL bit is
set, and the
.GSRIE bit is enabled.
0 = interrupt disabled
1 = interrupt enabled
Bit 1: CLAD Loss Of Lock Interrupt Enable (CLOLIE) The interrupt pin will be driven when this bit is enabled, the
GL.SRL.CLOLL is set, and GL.ISRIE.GSRIE bit is enabled.
0 = interrupt disabled
1 = interrupt enabled
Bit 0: Global Performance Monitoring Update Status Interrupt Enable (GPMSIE) The interrupt pin will be
driven when this bit is enabled and the
.GPMSL bit is set and the
.GSRIE bit is enabled.
0 = interrupt disabled
1 = interrupt enabled
Register Name:
GL.GIORR
Register Description:
Global General Purpose IO Read Register
Register Address:
01Ch
Bit
# 15 14 13 12 11 10 9 8
Name
-- -- -- -- -- -- -- --
Bit
# 7 6 5 4 3 2 1 0
Name GPIO8 GPIO7 GPIO6 GPIO5 GPIO4 GPIO3 GPIO2 GPIO1
Bits 7 to 0: General Purpose IO Status [8:1]] (GPIO[8:1] ) These bits reflect the input or output signal on the 8
general purpose IO pins.