Aux clip, Ranking (***), Sort->tc – EVS MulticamLSM Version 9.00 - March 2008 User's Manual User Manual
Page 98: Procedure

EVS
Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
89
A
UX
C
LIP
This function allows assigning a clip as auxiliary audio clip to the current
playlist. Press CLEAR + Aux Clip (CLEAR + SHIFT + B) to remove the
current auxiliary clip. Refer to the Chapter 13 “Playlist Management”, on
page 129 for more details.
R
ANKING
(***)
The Ranking function allows assigning a ranking to the current clip.
Pressing several times this key will scroll through the different values: 0
(***, not highlighted),
***
,
**
,
*
.
Depending on the mode selected with the D key (CLIP/CAM), this ranking is
assigned only to the camera angles of the clip loaded on the controlled
channels (CAM mode), or to all camera angles of the clip (CLIP mode).
If the Keyword Info parameter of the Setup menu is set to “Yes”, the
ranking will appear on the OSD of the output monitors when cueing up the
clip.
S
ORT
->TC
The Sort->TC function allows the operator to search the database for all
clips or trains containing a specific time code. Press SHIFT+C again in Set
TC mode to call it.
When calling this function, the time code of the current picture is used as a
default selection. The operator can immediately perform the search or he
can edit that time code before starting the search.
Procedure
Note
The Reset function resets all default parameters, including the
ones related to the material and the TC type to search on.