EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 129)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
120
Criteria Description
date will be considered.
The <BACKSPACE> key can be used to clear the last digit
entered. Press the <TAB> key again to move the cursor back
to the keywords list.
Level /
Ranking
This restricts the search to the clips with a ranking equal or
higher to the ranking defined in that screen.
Press the ←/→ arrow keys until reaching the desired ranking,
and press ENTER. The selected ranking is highlighted in
green.
Press the <TAB> key again to move the cursor back to the
keywords list.
Keywords This restricts the search to the clips containing all keywords
defined in this screen.
To assign a keyword, move the cursor to the desired keyword
and press ENTER, or click on the keyword using the stylus.
A maximum of 3 keywords can be used as search criteria. If
all 3 keyword locations are already occupied, the operator
needs to clear some of them to select new keywords.
Archive
status
This restricts the search to the clips having the archive status
selected.
Parameter On the VGA
None (default) -
clips not archived X
clips to be archived >A
clips archived A
12.3.1.2 S
EARCH
O
PTIONS
In addition to the search criteria available at the bottom of the screen, two
search options are accessible from the Function keys F2 and F4:
Consider Record trains and / or clips in the Search
This option allows the inclusion of record trains in the results in searches
with time code criteria. Press F2 to toggle between CLIP / CLIP+REC / REC.
Consider time codes from the LTC and/or USER TC tables in the
Search
This option makes it possible to take into account the time codes from the
LTC and/or the USER TC tables in searches with time code criteria. Press
F4 to toggle between LTC / USER / LTC+USER.