EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 198)

EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
189
18. Sony, XtenDD35, Odetics &
VDCP Protocols
18.1 PROTOCOL OVERVIEW
These protocols allow the XT[2] server to be controlled by external devices.
S
ONY
BVW75
PROTOCOL
This protocol allows the server to be seen as a VTR by the controlling
device. On a playback channel, all usual transport commands (play,
PlayVar, pause, goto time code, pause, stop, etc…) are supported. On a
record channel, only Rec and Stop commands are supported.
This protocol is the simplest one but does not support clip management. It
should be used when the controlling device does not support the XtenDD35,
Odetics or Louth VDCP protocols (ex: edit controllers, NLE applications,
some video switchers, VTR controllers, etc.)
X
TEN
DD35
PROTOCOL
This protocol is based on the Sony BVW75 protocol for all standard
transport commands. It has extended commands so that it supports clip
management: using this protocol, the controlling device can create, name,
recall and delete clips.
This protocol can be used with Thomson/GVG XtenDD range of switchers,
and with DNF ST300-EVS and 4040CL-EVS controllers.
O
DETICS PROTOCOL
This protocol is based on the Sony BVW75 protocol for all standard
transport commands. It has extended commands so that it supports clip and
playlist management: using this protocol, the controlling device can create,
name, recall and delete clips, but it can also manage playlists.
This protocol can be used with many different control devices and
automations software, including DNF ST300 and 4040CL controllers.