Possible values, Time code colour on the vga, 3 how to setup the primary tc and user fields – EVS MulticamLSM Version 9.00 - March 2008 User's Manual User Manual
Page 57

EVS
Multicam - User Manual
Version 9.00
EVS Broadcast Equipment SA – March 2008
48
On the first page of the VGA Setup screen, the Primary TC field specifies
which time code type will be displayed at the bottom the VGA and will be
used to work with the video material stored on the given recorder.
P
OSSIBLE
V
ALUES
The values can be the following:
LTC
LTC time code, which is automatically stored in the LTC table.
It is specified in the LTC field.
USER
User-defined time code, which is stored in the USER TC table
and specified in the USER field.
T
IME
C
ODE
C
OLOUR ON THE
VGA
Depending on the value selected for this setting, the time code displayed at
the bottom of the VGA will have a different colour:
• If the LTC time code is selected, the time code colour will be white.
• If the USER time code is selected, the time code colour will be yellow.
5.1.4.3
H
OW TO
S
ETUP THE
P
RIMARY
TC
AND
U
SER
F
IELDS
To set up the primary TC or USER field, proceed as follows:
1.
Press SHIFT-F2 to open the VGA Setup screen.
2.
Use the
3.
Use the right and left arrows to go through the possible values for
that field.
The value defined when you leave the field will be saved.