EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 139)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
130
13.1.3 H
OW TO
S
ELECT A
P
LAYLIST
To activate another playlist, proceed as follows:
1. Go to playlist bank by pressing SHIFT + F10.
2. Select the playlist as required (press F1 - F10)
PAGE 1 contains Playlists 10 to 19, PAGE 2 contains 20 to 29, PAGE 3
contains 30 to 39,…, and so on.
Playlists from page 10 are not available from the EVS Remote panel. These
playlists are reserved for external protocols (Odetics, Louth VDCP, EVS
AVSP).
The access to playlists from other machines on the SDTI network is similar:
select the machine from the Network menu on the Remote, then access the
playlist bank of that machine, and select a playlist.
On the VGA clip screen, pressing enter on a selected playlist in the playlist
bank makes it the current playlist.
Important when accessing network playlists
• Playlists information is not permanently refreshed on the
network. The playlist information for a remote playlist bank is
only transferred when entering that bank. If you are already
connected to a remote playlist bank, press SHIFT+F10 again to
refresh the playlist information for this bank.
• Remote playlists are available as “Read Only”, and can not be
edited. If you want to modify a network playlist, you have to
create a local copy on your machine first. This operation is
done instantly if the clips remain in their original location.
Refer to the next paragraph for details about copying playlists.
13.1.4 H
OW TO
C
OPY A
P
LAYLIST
13.1.4.1 H
OW TO
C
OPY A
P
LAYLIST FROM THE
R
EMOTE
P
ANEL
To copy a playlist, proceed as follows:
1. Go to playlist bank (local or from another machine on the network).
2. Select the original playlist to copy by pressing the corresponding F_
key on the Remote.
3. Select an empty playlist location on your local machine.
A new menu appears on the LCD display of the Remote panel, with
the corresponding message on the OSD of the output monitors,
asking whether you want to copy the original playlist to the new
location or whether you simply want to select a new, empty playlist
(default choice):