EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 77)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
68
P
OST
R
OLL
When the Post-Roll mode is enabled, that function is highlighted on the LCD
and a “P” appears on the OSD of the output monitors.
When the user exits Multicam with the Post-Roll mode on, this mode will
still be enabled when Multicam is restarted.
The Post-Roll mode works as follows depending on the element played:
• When a clip is played, it will not stop on the Short OUT point, but will
continue to play through the Short OUT point by the Post-Roll duration
defined in the Setup Menu.
• When a record train is played, the same will happen if the Record Train
OUTs parameter is set to “Freeze” in the Setup menu.
• When a playlist is played, the Post-Roll will apply only to the last clip of
the playlist.
S
ORT
->TC
This function allows the operator to search for all clips that contain a
particular time code. For more information on this function, refer to the
section “Sort->TC “, on page 89.
S
EARCH
This function allows the operator to search the database using keywords
and ranking. Refer to the section 12 “Keyword Management” on page 112
for further details.
To return to the operational menu, press the MENU key from the Remote
panel.