EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 47)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
38
defined on page 7.1
4.13.3 S
ECONDARY
C
ONTROLLER FOR
PGM1/2/3/4
Possible values: list of protocols defined on page 7.1. Default: ---------- --
Available only if the main controller for that channel is an EVS remote.
Special Control Settings p.7.3
Main RS422 Second. RS422
PGM5:[F1]---------- -- [F5]---------- --
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
Multicam is now capable of operating in LSM Base Config with 5 play
channels assigned. On this Protocol assignment page, the user can define
the protocols and ports to manage this channel.
The LSM Remote by itself cannot control PGM5.
4.13.4 C
ONTROL
T
YPE
Special Control Settings p.7.4
Control type OSD Display
PGM1:[F1]Parallel [F5] Main
PGM2:[F2]Exclusive
PGM3:[F3]Exclusive
PGM4:[F4]Exclusive
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
Default: Exclusive
This setting makes it possible to allow channels to either be controlled in
‘Exclusive’ control (same as allowed in the past with 2
n d Control Mode) or in
Parallel Mode.
In Parallel mode, the user can define which device will manage the OSD
display characters (i.e. the main or the secondary controller).