EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 149)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
140
13.1.13.7 U
NDO
/R
EDO
This function is available from the secondary menu of the playlist, that is
accessed by pressing MENU in the Playlist Edit mode.
The last modifications of a playlist can be undone/redone for as long as the
operator does not exit the playlist mode (e.g.: returning to live).
Pressing the Undo command (D key) will undo the last modification. Up to 9
modifications can be undone. Once a modification has been undone, it is
possible to redo it by pressing the Redo key (C key).
13.1.13.8 M
AKE
L
OCAL
This function is available from the secondary menu of the playlist, that is
accessed by pressing MENU in the Playlist Edit mode.
This function offers the possibility to copy locally remote clips in a playlist.
In the playlist secondary menu, select on the B position MakeLoc.
When the function is called, the remote clips are replaced by short copies of
the local ones as soon as they are available.
13.1.14 H
OW TO
D
ELETE
C
LIPS FROM A
P
LAYLIST
To delete a clip in a playlist, proceed as follows:
1. While in Playlist Edit mode, scroll within the playlist to the clip that
needs to be deleted.
If the Browse mode is active, the first frame will appear on the display
as each clip is scrolled through.
2. When you have selected the clip to be removed, select Delete from the
Playlist Edit menu.
The selected clip will be removed from the playlist. A confirmation message
will appear if that option has been enabled in the Setup menu.
13.1.15 H
OW TO
I
NSERT
C
LIPS INTO A
P
LAYLIST
Note
Depending on what is selected in the Setup menu, the clip will be
inserted before or after this selected position.
To insert a clip into a playlist, proceed as follows:
1. Using the Playlist Edit mode or the Browse mode, as above, scroll to the
location where the clip must be inserted.