2 how to set default video and audio transitions, Efault, Ideo and – EVS MulticamLSM Version 9.00 - March 2008 User's Manual User Manual
Page 153: Udio, Ransitions

EVS
Multicam - User Manual
Version 9.00
EVS Broadcast Equipment SA – March 2008
144
Left 00:00:00:00.
00:00:00:00
111A/03
100
00:00:00
1/5
Duration of the current clip
(Min:Sec:Fr)
Speed
Timecode
& Clip Countdown
Timecode
Current clip /
total clips in Playlist
*Pl.15*
Plist Duration
(Countdown)
Playlist #
V.Mix 00:00
A.Mix 00:00
IN-00:00:00
Playback speed
Spd 100
A.Del 00:00
OUT+00:00:00
Audio Delay
OUT point
Video Effect type
& duration
Audio Effect duration
IN point
13.2.2
H
OW
T
O
S
ET
D
EFAULT
V
IDEO AND
A
UDIO
T
RANSITIONS
The simplest type of Split Audio edit that can be performed on an LSM is to
make the video and audio transitions at the beginning of the clip have
different durations, such as a 12 Frame Video Mix with a 2 sec Audio
crossfade.
A default value for each can be entered in the Setup Menu so that each time
a clip is entered or inserted into a playlist the Default values are used.
Vid. Effect duration is on page 4.1, function key F1 (range up to 20:00
secs)
Aud. Effect duration is on page 4.1, function key F2 (range “Lock to
video”, then up to 20:00secs)
Important
If the Audio Effect Duration parameter in the setup is set to
“Lock to video”, it will never be possible to adjust independently
the duration of the audio and video transitions. If you want to
adjust one of these transitions and the other one follows, please
check the Audio Effect Duration in the setup, and make sure it is
NOT set to “Lock to Video”.
In an LSM playlist the video and audio effects end at the OUT point of a
clip, so the duration of clips is shortened by the length of the effect.