EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 158)

EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
149
13.2.7.3 V
IDEO
D
ELAY
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press SHIFT + A Base (B).
4. Press to highlight V DELAY (SHIFT + B)
5. At the on screen prompt, enter a value on the F_ keys including leading
zeros (0+2+1+2= 2:12), OR move the T-BAR and press ENTER.
The value entered will be present on the PRV SCREEN when the clip is next
to play in a playlist.
13.2.7.4 E
DIT POINT
(A BASE)
Video from the previous clip is extended and video from the clip being
edited is shortened.
Note
When editing using the Video IN/OUT as the reference point (V
BASE) the video will be the top line on the OSD display. When
editing using the audio IN/OUT as the reference point (A BASE)
the audio will be the top line on the OSD display.
13.2.7.5 V
IDEO
S
PLIT
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press to highlight A Base (SHIFT+B)
4. Press to highlight V SPLIT (D)
5. Jog to the point where you want to set your transition and mark an OUT
point if you do a video delay or mark an IN point if you do a video
advance.
The value entered will be present on the PRV SCREEN when the clip is next
to play in a playlist.