EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 86)

EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
77
H
OW TO
C
ONFIGURE THE
V
IDEO
D
ELAY
P
ARAMETERS OF
A
P
LAY
C
HANNEL
1. Select the play channel to configure by pressing ALT+ the
corresponding F_ key on the PC keyboard (ex: ALT+F1 for PGM1,
ALT+F2 for PGM2/PRV, etc)
2. If you want to use another server on the SDTI network as a source,
press SHIFT-F7 on the PC keyboard to call up the network list. Use the
arrow keys to select a server, and press ENTER to validate.
3. Select the camera angle: use the left / right arrow keys, or the
key to move the green cursor on the desired camera, the press ENTER.
The new camera angle is loaded on the channel.
4. Set the new value for the delay: use the left / right arrow keys, or the
key to move the green cursor over the TARGET DELAY field, and
enter the desired delay value in hh:mm:ss:fr. Press CTRL + the
corresponding F_ key on the PC keyboard to activate the new delay on
the selected channel (ex: CTRL + F1 start the new delay on PGM1). If
the duration of the record train is lower than the target delay, the
channel will pause on the first recorded picture until the record train is
long enough for the desired delay. In this case, the message “WAIT” is
displayed on the OSD of that channel.