EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 199)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
190
Non standard commands in Sony, XtenDD35 and Odetics protocols on the
play channel of an EVS server:
REC: when a REC command is sent to a play channel, this channel will
return in E2E mode on its default record train. If the default record channel
associated to that player is currently stopped, it will jump to the last
recorded picture and pause.
EJECT: if the play channel is not yet in E2E mode when the command is
sent, it will return to E2E mode on its default record train (similar to
receiving a REC command). If the play channel is already in E2E mode, it
will switch to the next record channel available (AÆBÆCÆ…ÆAÆ…). This
is for example useful with a BVE edit controller to allow the editor to select
the record train he wants to work with.
L
OUTH
VDCP
PROTOCOL
This protocol is a more complex protocol mainly used by automation
systems but also by Sony switchers. It is not based on the Sony BVW75,
and can handle clips as well as playlists.
IPDP P
ROTOCOL
For more information on how the IP Director application controls the XT[2]
server, refer to the IP Director Technical Reference manual and User
manual.