EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 35)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
26
4.9.2 A
UDIO
E
FFECT
D
URATION
Possible values: Lock to video (default), or 0s00fr to 20s00fr
This parameter is only used when Split Audio Editing is enabled. It sets the
duration of audio transition effect. Used as default value in Playlist Edit
mode. If Split Audio Editing is disabled, the video and audio transitions will
always have the same duration, based on the setup for the video transition,
whatever the value of the Audio Effect Duration defined in the setup menu.
If this parameter is set to “Lock to video”, you will not be able to define
different durations for the audio and video transition inside a playlist, even
if the Split Audio Editing is enabled.
4.9.3 W
IPE
T
YPE
Possible values: Vert. L>R (default) / Vert. R>L
This parameter specifies the vertical wipe effects from Left to Right or from
Right to Left.
4.9.4 D
EFAULT
P
LST
S
PEED
Possible values: Unknown (default), then from 0% to 100%
This defines the default speed used for clips entered into playlist. Unknown
means that the speed of the previous clip in the playlist will be used as a
reference for the current clip. 0% will force the playlist to pause at the end
of the previous clip.
4.9.5 I
NSERT IN
P
LAYLIST
Possible values: After (default) / Before
This setting defines how the Insert function of playlist will be performed:
depending on the value specified in this setting, the new clip will be
inserted after or before the current clip in the playlist.
4.9.6 C
ONFIRM
I
NS
/D
EL
C
LIP
Possible values: No (default) / Yes
If enabled, a confirmation will be required each time the operator wants to
add a clip to the playlist or remove a clip from the playlist.