EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 162)

EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
153
5. Jog your playlist until you reach the point where you want to reset the
original audio tracks. Mark an OUT point.
The OSD screen indicates the following information:
In eight tracks mode
*PL11/03* LEFT 06:42:22
V Mix 02:25 Spd.Unk
A Mix 02:25 A.Del. 00:00
IN-00:00:00 OUT+00:00:27
00:10
1→3 3→3 5→5 7→7
2→4 4→4 6→6 8→8
12:23:45:13 00:07:13 100
112B/04 ClipName 999/999
In dual stereo mode
*PL11/03* LEFT 06:42:22
V Mix 02:25 Spd.Unk
A Mix 02:25 A.Del. 00:00
IN-00:00:00 OUT+00:00:27
00:10
■■■ ■■ 3→1 3→3
■■ ■ 4→2 4→4
12:23:45:13 00:07:13 100
112B/04 ClipName 999/999
In stereo mode
*PL11/03* LEFT 06:42:22
V Mix 02:25 Spd.Unk
A Mix 02:25 A.Del. 00:00
IN-00:00:00 OUT+00:00:27
00:10
■■■ 2→1
■■ 2→2
12:23:45:13 00:07:13 100
112B/04 ClipName 999/999
One can set as many swap points as needed.
If only an IN swap point is set for one clip, the audio tracks will be reset by
default for the next clip in the playlist.
Please note that when a swap point is set, a cross-fade is played between
the original audio track and the new track. The duration of the cross-fade is
the default audio transition.
When a swap point is present in a playlist, the display on the VGA and on
the OSD changes: a “*” is added next to the audio Fx information.