EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 63)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
54
6. Remote panel operations
6.1 OPERATIONS
RECORD
This key lights red when the system is recording. Pressing this key brings
the system in E/E (“live”) mode, and starts the record if necessary
(depending on the settings of the Setup menu). The E/E mode is actually
playing pictures already recorded by the system, and has a delay of 3
frames compared to the live source, on all audio and video tracks.
MARK
This function marks up to 256 cues that can be marked while recording or
playing. The cues are marked on the LIVE or PLAYBACK program depending
on the value set in the Setup menu. When the operator has marked 256
cues, the next one will overwrite the oldest one.
LAST CUE
This function re-cues the machine to previous cue point relative to the
current time code position. Each time the Last Cue button is pressed, the
machine re-cues to the previous cue, etc. When recalling a cue point, the
cue number appears in the upper left corner of the OSD if this option is
enabled in the Setup menu (page 1.1, F4)
PLAY
This function initiates a forward motion. It can also be used to start
playback of playlists and clips (refer to PLST command).
When Pgm Spd/Var Max is OFF, the default playback speed when pressing
the PLAY key is 100% for standard pictures, 33% for Super Motion pictures
with a Triple Speed camera (SD), and 50% for Super Motion pictures with a
Double Speed camera (HD),.
When Pgm Spd/Var Max is ON, the value defined in the Setup for this
parameter is used.