EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 76)

EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
67
one on the LCD menu. Please refer to Setup menu to select the duration of
the transition effect.
P
GM
S
PD
/V
AR
M
AX
Pressing PgmSpd once enables the Program Speed mode and highlights
this function on the LCD. Pressing the key once more enables the Var Max
mode and highlights this function on the LCD. The PLAY key is flashing red
while either of these modes is enabled.
• Program Speed mode: In this mode, only two speed values are
available from the lever: 0% when the lever is in the lower position, or
the speed defined in the setup (p.6.1 F3) for any other position of the
lever.
• Var Max mode: the speed range defined by the lever is limited between
0% and the speed value defined in the setup (p.6.1 F3).
S
W
T
O
I
N
When this function is enabled (highlighted), a camera change will cause a
jump to the corresponding IN point if existing. It will switch in Sync if no IN
point exists for the current element, or if SW to IN is OFF.
P
REF
Selecting this function enables the Preference mode.
A
UD
.M
ET
.
This option enables/disables the display of audio meters for all channels
using the OSD of the output monitors.