EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 126)

EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
117
The ID and name of the clip that keyword are going to be assigned to is
displayed at the bottom on the screen, along with the keywords, ranking and
archive status already assigned to that clip.
H
OW TO
A
SSIGN A
K
EYWORD TO A
C
LIP
Move the cursor to the desired keyword and press ENTER, or click on the
keyword with the stylus. The keyword will be assigned to the first available
keyword location on the last line of the screen. Repeat this to assign more
keywords (up to 3) to the current clip.
Depending on the CLIP/CAM mode, the keywords will be assigned to the
current camera angle only (CAM mode), or to all camera angles of the
current clip (CLIP mode).
If 3 keywords are already assigned to the clip, the operator has to clear
some of them to be able to assign new keywords.
H
OW TO
C
LEAR A
K
EYWORD WITH THE
K
EYBOARD
Press to move the arrow cursor to the lower area of the screen. Red
arrows will appear around one of the keywords or ranking values. Use the
←/→ arrows to select the keyword to remove, and press CTRL+DEL. Press
the key again to move the arrow cursor back to the keywords list.
H
OW TO
C
LEAR A
K
EYWORD WITH THE
S
TYLUS
Click on the keyword to remove on the last line, the click on the
CTRL+DEL:CLR KWD area on the screen, or press CTRL+DEL.
H
OW TO
E
DIT THE
R
ANKING OF THE
C
URRENT
C
LIP
W
ITH
THE
K
EYBOARD
Press the key to move the cursor to the lower area of the screen
Use the ←/→ arrows to select the desired ranking, and press ENTER. The
selected ranking is highlighted in green.
H
OW TO
E
DIT THE
R
ANKING OF THE
C
URRENT
C
LIP
W
ITH
THE
S
TYLUS
Click on the desired ranking, it becomes highlighted in green.