Multi pgm mode, 1 1/2/3 pgm modes (press a or b from main menu) – EVS MulticamLSM Version 9.00 - March 2008 User's Manual User Manual
Page 81

EVS
Multicam - User Manual
Version 9.00
EVS Broadcast Equipment SA – March 2008
72
9. Multi PGM Mode
9.1
1/2/3 PGM MODES (PRESS A OR B
FROM MAIN MENU)
Multicam has two modes for its basic operation, 1 PRV/PGM mode or Multi
PGM mode:
• The 1PGM+PRV mode, as described previously, is the more powerful of
the two, allowing for interaction between all outputs. Here, synchronized
replays can be rolled and chained between the cameras with either a
mix, wipe, or cut between them.
• The MULTI PGM mode is more basic, which gives the operator
independent control of all outputs.
In this mode, all outputs can be controlled together (such as jogging back to
a certain action, with all outputs) or they can be controlled individually
(either PGM 1, 2 or 3).
The secondary menu can be called by pressing the MENU key and is similar
to the 1PGM+PRV mode, except that the A function is empty since it is not
possible to create a transition between the channels in this mode. Please
refer to the Chapter 8 “PGM-PRV Mode”, on page 66 for description of the
other functions of the secondary menu.
The primary menu in Multi PGM mode gives access to the functions detailed
in the following paragraphs:
PGM1 CAM A *PGM2* CAM B PGM3 CAM C
Aud.Met.
PgmSpd
Sort->TC Post-Roll
Sw to IN
Search
Pref
P.1
B.1 Clips: LOCAL Records: LOCAL
PL 11: <
Msg:
Rst Cam
Local
Sync
To
2nd
CTRL
PGM 1
PGM 2
PGM 3
TOGGLE