1 how to make a playlist, Display, Remaining time – EVS MulticamLSM Version 9.00 - March 2008 User's Manual User Manual
Page 138: Playlist management, 1 standard mode

EVS
Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
129
13. Playlist Management
13.1
STANDARD MODE
13.1.1
H
OW TO
M
AKE A
P
LAYLIST
You will see that a playlist can be made very quickly. The experienced
operator can include a clip at the end of the playlist containing an action
that happened seconds before the playlist is played on air.
1. Choose the first clip for your playlist.
2. Then press ENTER on the Remote.
3. Repeat as necessary until last clip is entered.
When Multicam is first switched on, the active playlist will automatically be
playlist 11.
13.1.2
I
NSERTING
“R
ECORD IN
P
ROGRESS
”
C
LIPS INTO
P
LAYLISTS
“Record in progress” clips can be inserted in playlists.
D
ISPLAY
They will be displayed with the “Creating” message in the playlist on the
VGA.
The “Record in progress” clips ID will be blinking on the mini playlist display
and on the playlist screen on the Remote panel, as well as on the OSD.
R
EMAINING
T
IME
The remaining time in playlists containing “Record in progress” clips with
only an IN point is as follows:
The remaining time displays --:--:-- on all the screens (OSD, VGA, Remote
panel screen) where this information is displayed.