7 clips settings, Rotect – EVS MulticamLSM Version 9.00 - March 2008 User's Manual User Manual
Page 28

EVS
Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
19
4.7
CLIPS SETTINGS
Clips p.3.1
[F1]Protect pages : 1 2 3 4 5 6 7 8 9 10
[F2]Confirm delete clips : No
[F3]Auto name clips : Disable
[F4]Clip Post-Roll : 02s00fr
[F5]Call channel VGA : Disable
[F6]Clip edit by network : Disable
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
4.7.1
P
ROTECT
P
AGE
Possible values: No (default), or select one or more clip pages from 1 to 10
This function allows users to protect clips stored on selected pages from
accidental deletion. These clips are also protected when using the Clear All
Clips function from the main menu of the Remote panel.
Note
When doing a “Clear All Clips” from the main menu of the Remote
panel, protected clips will not be deleted. When doing a “Clear
Video Disks” from EVS Maintenance menu, all clips are deleted,
including protected ones!
Note
The OSD will display a key icon next to the clip number when the
clip is protected.
H
OW TO
P
ROTECT
C
LIPS ON
S
ELECTED
P
AGES
To protect clips on selected pages, proceed as follows:
1.
In the 1
s t
page of Clip settings, press the F1 key to edit this setting.
2.
Press the F_ key corresponding to the page number you want to
protect/unprotect.
Protected pages will be highlighted on the LCD and the corresponding
F_ key lights red. F_ keys of unprotected pages light green.
3.
Press ENTER to validate your selection.
The LCD display indicates the progress of the status update for the selected
pages. This might take several seconds, depending on the number of clips
in the pages that must be updated. In the above example, pages 3, 5 and 6
are protected.