EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 134)

EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
125
It is also possible to assign keywords and ranking to a clip before it is
created. Indeed, when a record train is loaded, as soon as the operator
marks an IN or OUT point, the main and secondary menu changes to make
the keyword functions available.
The SHIFT+A function of the main menu, normally used by the Reset CAM
function, can be used to define the ranking, without entering the secondary
menu. For additional functions like selecting keywords, flagging the future
clip for archiving, marking it to be pushed to another machine, defining its
name from the keywords, they can be performed from the secondary menu,
exactly the same way as for a clip already stored. All these settings are
memorized and will be applied to the clip when it is created.
12.4.2 A
SSIGNING
K
EYWORDS IN NUMERIC
M
ODE
To assign keywords to a clip in numeric mode, recall the clip, then press
MENU to access the secondary clip menu on the Remote panel.
Enter the keyword position in the list using the F_ keys. Every time a new
digit is entered, the corresponding keyword is displayed in the highlighted
area in the centre of the LCD screen, to allow the operator to validate the
entry before confirming it. If a wrong digit is entered, press the CLEAR key
to delete it. Once the right keyword is found, press ENTER to confirm or
MENU to cancel.
The rules for keyword assignment and deleting keywords are identical
between LIST and NUMERIC modes.
1 player_B10123 2 2action_689012 3 keyword89012
action_889012 111A
Enter keyword # 8 with F_ keys + ENTER
Push Aux Clip Sort->TC PostRoll
>Archive *** Name Cam
PGM1 Cam A *PRV1* Cam B
Push PgmSpd Sw To In Pref
>Archive *** Name Cam
P.1 B.1 Clips: Local Records: Local
PL 11: < >
Msg:
*** Local Sync Prv 2nd CTRL
Cam A Cam B Cam C Cam D