EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 147)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
138
13.1.11.2 N
EXT
While the playlist is rolling on air, selecting the Next function will start the
transition of the next clip with the transition effect listed on the playlist.
This can be used if a clip is running too long and it is necessary to shorten
up the playing time.
13.1.11.3 S
KIP
While the playlist is rolling, the next clip in the sequence is always
displayed on the PRV screen. The Skip function allows the operator to
discard clips before they go on-air. The clip that will be «skipped» is the
one displayed on the PRV screen. This function does not remove the clip
from the playlist, but it simply allows it to be skipped during playback.
13.1.11.4 E
DIT
Selecting the Edit function gets the user back to the Playlist Edit mode.
13.1.12 B
ROWSING
W
ITHIN A
P
LAYLIST
Once the playlist is activated, selecting the BROWSE key on the Remote
panel allows the operator to use the jog dial to scroll up and down the
playlist entries.
13.1.13 F
UNCTIONS
A
VAILABLE ON THE
R
EMOTE IN
P
LAYLIST
E
DIT
M
ODE
In the Playlist Edit mode, as each clip is highlighted, the first frame can be
seen on the display monitor. To change any of the options, simply highlight
the desired clip, then select a function from the above menu and use the
control lever to adjust to the desired value.
In Playlist Edit mode, the duration displayed in the top right corner of the
LCD screen is the playlist total duration, from the beginning to the end.
PL11 LSM01 Paola LOC TDUR=00:00:02:22
111A/04 Clipname0123 00:00:29 Unk W00:10
112B Clipname4567 00:53:29 Unk W00:10
112B/02 Clipname8910 00:53:29 Unk W00:10
Effect Edit All
Insert Speed FX Dur Delete