beautypg.com

EVS MulticamLSM Version 9.00 - March 2008 User's Manual User Manual

Page 84

background image

EVS

Multicam - User Manual

EVS Broadcast Equipment SA – March 2008

Version 9.00

75

Practical example

The operator builds a playlist with Fills and another playlist with Keys. He
sets the “Playlist Load” parameter to “Conditional” in the setup menu, then
enters the 2PGM mode, selects the Fills playlist as current playlist, presses
A to gain control on PGM1, presses PLST two or three times to enter the
PLST DIFF mode and cue up the Fills playlist to its 1st clip. Then he
presses the TAKE key to return to the PGM selection menu, selects the
Keys playlist as current playlist, presses B to gain control on PGM2,
presses PLST two or three times to enter the PLST DIFF mode and cue up
the Keys playlist to its 1st clip. Then he presses the TAKE key to return to
the PGM selection menu, presses D to gain control on both PGM channels,
then presses TAKE to enter the PLST DIFF menu. He will see on the LCD
screen the content of both playlists side by side, and can browse them or
play them in Sync at any speed, and perform SKIP and NEXT commands as
needed.