EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 107)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
98
ALT+R: RECORD mode - to connect to the record trains of a remote
machine
ALT+P: CLIP+REC mode - to connect to the clips and record trains of a
remote machine.
After selecting CLIP, RECORD or CLIP+REC mode either with the keyboard
or by clicking with the stylus, select the machine you want to connect to:
click on it with the stylus, or move with the arrow keys and press ENTER on
the keyboard.
Pressing ALT+L or clicking with the stylus on “LOCAL” will close the
CONNECT window and return to local clips and record trains.
To close the CONNECT window without changing the connection mode or
remote machine, press ESC.
The “*” next to one of the machine in the list indicates which machine is the
active network server. Refer to the Chapter 14 “XNet SDTI Network”, on
page 162 for details.
F0:P
LAYLIST
The Playlist screen can be accessed by selecting F10 on the keyboard.
11.3.6 H
OW TO
R
ECALL A
C
LIP
11.3.6.1 H
OW TO
C
ALL A
C
LIP
B
ELONGING TO THE
M
ACHINE YOU
A
RE
C
ONNECTED TO
The machine to which you are connected is indicated on the left side of the
Title Bar.
To call a clip belonging to the machine you are connected to, proceed as
follows:
1. Type either the 3 or 4 digits of the ID. Ex: 111 or 111A. The entry
appears in the Name field.
2. Press F3
o If only 3 digits are entered, the primary camera is selected
o If 4 digits are entered, the clip is selected according to the given
camera angle.
o If no clip matches the entry, no selection is done.
Note
ESC key can still be used at any time to clear the Name field.