EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 157)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
148
13.2.6.5 A
UDIO
S
PLIT
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press to highlight V Base (SHIFT+A).
4. Press to highlight A Split (D).
5. Jog to the point where you want to set your transition and mark an OUT
point if you do an audio delay or mark an IN point if you do an audio
advance. The value entered will be present on the PRV screen when the
clip is next to play in a playlist.
13.2.7 H
OW
T
O
P
ERFORM
A
N
‘A B
ASE
’ E
DIT
When in A Base mode the Browse function searches between audio IN/OUT
points and NOT video
13.2.7.1 V
IDEO
A
DVANCE
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press SHIFT + A Base (B).
4. Press to highlight V Advance (SHIFT+A)
5. At the on screen prompt, enter a value on the F_ keys including leading
zeros (0+2+1+2= 2:12), OR move the T-BAR and press ENTER.
The value entered will be present on the PRV SCREEN when the clip is next
to play in a playlist.
13.2.7.2 E
DIT POINT
(A BASE)
Video is shortened in the previous clip and the video from the clip being
edited is extended.