Soft reboot» from the keyboard, Network, Goto tc – EVS MulticamLSM Version 9.00 - March 2008 User's Manual User Manual
Page 67: How to go to a given time code, Goto

EVS
Multicam - User Manual
Version 9.00
EVS Broadcast Equipment SA – March 2008
58
To reboot, press the following key sequence,
Between step 3 and step 4, the RECORD button will flash GREEN and the
PAGE button will flash RED. Hitting the PAGE button will reboot the system.
Hitting the RECORD button will return to normal operation.
«Soft Reboot» from the keyboard
It is also possible to run a «soft reboot» which will exit the software and
return the user to the EVS Menu. Here, the software can be selected and
entered again without having to reboot the entire system. When running the
following procedure, the system will automatically save all recorded material
(record trains, clips, playlists) upon exit.
Hit ALT + Q on the keyboard or press F6 from the Main Menu, and confirm
with ENTER or cancel with ESC. You will exit the Multicam software and go
back to the EVS Menu.
NETWORK
This function gives access to the clips and/or record trains of other
machines on the network. After the selection of the machine, the way of
selecting clips and camera angles is similar to clips selection on the local
LSM system. See Chapter 14 “XNet SDTI Network”, on page 162 for
complete details.
GOTO
TC
The Goto TC option allows the user to jump to a given time code in the
loaded train or clip.
How to Go to a Given Time Code
To jump to a given time code of the loaded train or clip, you can use the
Goto TC option on the Remote panel.