EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 39)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
30
4.10.3 A
UDIO
M
ETERS ON
OSD
Possible values: Yes (default) / No
This parameter enables/disables the display of audio meters at the bottom
of each output monitor.
4.10.4 A
UDIO
M
ETERS
A
DJ
.(
D
B)
Possible range: -12 to +12 by 2 dB steps. Default: 0 dB
This parameter allows adjusting the sensitivity of audio meters on the OSD
of the output monitors. A positive value means that the meters will be more
sensitive.
4.10.5 A
UX
T
RACK
O
UTPUT
Possible values: Prv / Prv&7-8/15-16 / PGM
This parameter defines to which audio outputs the Aux. Track of the playlist
will be played out of.
Value Meaning
PRV (default) The Aux. Track will use the audio outputs normally
assigned to the PRV channel. If no PRV channel is
available, the Aux Track will not be assigned to any audio
output.
PRV&7-8/15-16 The Aux. Track will use the audio outputs normally
assigned to the PRV channel if there is one, plus all the
audio outputs from 7-8/15-16 that have not yet been
assigned to another channel. Use this option if you need
an aux track without PRV channel available.
PGM The Aux. Track will use the audio outputs normally
assigned to the PGM channel.
Audio p.5.2
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
This page is intentionally left blank and is reserved for future developments.