4 cue number on osd, 5 keyword info, 1 auto make clip for cam a – EVS MulticamLSM Version 9.00 - March 2008 User's Manual User Manual
Page 23: 2 auto make clip for cam b, 6 record train settings

EVS
Multicam - User Manual
Version 9.00
EVS Broadcast Equipment SA – March 2008
14
4.5.4
C
UE
N
UMBER ON
OSD
Possible values: Yes (default) / No
When set to “Yes”, the cue number is displayed on the OSD of the output
monitors when a cue point is recalled inside a record train.
4.5.5
K
EYWORD
I
NFO
Possible values: No (default) / Yes
Up to 3 keywords and a ranking can be assigned to every clip. When the
Keyword Info parameter is set to “Yes”, these keywords and ranking
appears on the OSD of the output monitors when the clip is loaded on its
Short IN point. As soon as the operator starts jogging into the clip or
initiates a playback, this information is removed from the OSD so that the
video content is clearly visible.
4.6
RECORD TRAIN SETTINGS
Record Trains p.2.1
[F1]Auto make clip for cam A : Yes
[F2]Auto make clip for cam B : Yes
[F3]Auto make clip for cam C : Yes
[F4]Auto make clip for cam D : Yes
[F5]Auto make clip for cam E : Yes
[F6]Resync to TC ref
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
4.6.1
A
UTO
M
AKE
C
LIP FOR
CAM
A
Possible values: Yes (default) / No
This function selects the automatic camera creation. When creating clips,
the clip corresponding to the camera on which IN/OUT points have been
marked are always saved. It is possible to save automatically the same
action on the other cameras.
4.6.2
A
UTO
M
AKE
C
LIP FOR
CAM
B
Possible values: Yes (default) / No
Make clip on CAM B even if no IN or OUT point has been marked on this
one.