EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 37)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
28
4.9.9 S
WAP
A
UDIO
T
RACKS
Possible values: Auto (default) / Manual
This parameter is only useful when performing split audio editing with at
least 2 mono audio tracks per video.
• Auto: the audio tracks to swap are automatically selected by the
application when inserting a swap point.
• Manual: the operator can define which audio tracks he wants to swap
when inserting a swap point.
Refer to the section 13.2 “Split Audio Mode”, on page 143 for details.
4.9.10 P
LAYLIST
L
OOP
Possible values: No (default) / Yes
This parameter makes it possible to loop playlists and replay them
continuously.
4.9.11 L
OAD
P
LAYLIST
Possible values: Always (default) / Conditional
This parameter is only used in 2PGM or 3PGM mode.
• Always: This always loads the selected playlist in PGM/PRV mode.
• Conditional: This loads the selected playlist on the selected PGM only
if only 1 channel is active when entering the PLST EDIT mode. Allows
loading and playing multiple playlists using a single Remote panel.
4.9.12 P
LAYLIST
A
UTO
F
ILL
Possible values: All Cam (default) / Prim+Sec / Primary / Secondary / Cam
A / Cam B / Cam C / Cam D / Cam E / Cam F
This parameter selects which camera angles will be used when using the
Playlist Auto Fill function from the main menu of the remote.