EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 176)

EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
167
C
LIPS
M
ODE
The Clip function (B) allows the operator to connect to the clip banks of
another LSM connected to the network. In other words, the VGA clip screen
and the F_ keys of the Remote show the clips from the selected LSM. If the
operator presses the RECORD key, he goes in LIVE mode on the local
record trains.
R
ECORDS
M
ODE
When the operator selects one of the LSM in the network menu, he connects
the record trains to this LSM. This means that the next time he presses the
Records function (C) the active channels will go in LIVE mode (or near
LIVE mode for remote trains
1 ) on the record trains of the selected LSM. The
clips remain connected to the LSM they were connected to.
C
LIPS
+R
ECORDS
M
ODE
The Clip+Rec function (D) allows the operator to both connect to the clips
banks and to the record trains of a remote XT[2] server. The VGA clip
screen and the F_ keys of the Remote panel show the clips from the
selected XT[2] server. The next time the operator presses the RECORD key,
the active channels will go in LIVE mode (or near LIVE mode for remote
trains) on the record trains of the selected LSM.
Select the function key corresponding to the remote system, then the LCD
display returns to the normal mode:
The names of the remote systems are now displayed after the Page and
Bank information and in the Title bar of the Clip screen.
PGM1 112B/04 *PRV1* CAM B
AUX Clip
MIX Sw to IN PGMSpd PREF
P.1 B.1 Clips: ALBERT Records: MICHEL
PL 11: <
Msg:
LOCAL SYNC PRV
CAM A CAM B CAM C CAM D