EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 171)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
162
14. XNet SDTI Network
14.1 OVERVIEW
The XNet network is composed by several XT[2] servers all connected with
a 75-Ohm coaxial cable (BNC). The exchange between systems is operated
through the SDTI interface at 540 or 1485 Mbps.
The XNet network requires a network server dedicated to the management
of the database shared among all XT[2] servers. This doesn’t require an
extra server, but it has to be assigned to 1 server on the network. If this
system disconnects, another XT[2] server will automatically take over.
These settings can be found in the Configuration option of the EVS
Maintenance menu. For details about the setup of XNet network, please
refer to the XT Disk Recorder Technical Reference.