EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 160)

EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
151
13.2.8 H
OW TO
I
NSERT A
C
LIP INTO A
P
LAYLIST
W
ITH
S
PLIT
A
UDIO
Note
Transitions are reset to Zero on INSERT and DELETE functions.
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press to highlight V Base (SHIFT+A)
4. Press to highlight A Split (D)
5. Jog to the point where you want to set your transition and mark an OUT
point if you do an audio delay or mark an IN point if you do an audio
advance.
13.3 SWAP AUDIO TRACKS MODE
13.3.1 I
NTRODUCTION
The swap audio tracks mode allows swapping audio tracks between two
points in a playlist.
In four tracks mode, the “auto” mode replaces audio tracks 1&2 by audio
tracks 3&4 in four audio mode. It replaces audio track 1 by audio track 2 in
stereo mode.
The manual mode lets you choose which tracks to replace.
Note
In eight tracks mode, you only have access to the manual mode.
13.3.2 H
OW
T
O ENABLE THE AUDIO SWAP MODE
To enable the Audio Swap mode, proceed as follows:
1. Enter the Setup menu.
2. Select the Swap Audio Tracks mode on page 4.2, F3.
3. Choose a value between “Auto” and “Manual”.
Please note that the Split Audio Editing has to be enabled in the Setup