10 pgm/prv mode, 11 mapping network cam, Mode – EVS MulticamLSM Version 9.00 - March 2008 User's Manual User Manual
Page 43: 10 pgm/prv, 11 m, Apping, Etwork

EVS
Multicam - User Manual
Version 9.00
EVS Broadcast Equipment SA – March 2008
34
Value Meaning
No (Default)
Clip machine, page and bank can be selected
independently on the VGA screen and on the EVS
Remote panel.
Yes
Clip machine, page and bank are synchronized
between VGA screen and EVS Remote panel.
Connecting to the clips of a network machine or
coming back to the clips of the local machine, or
selecting a new page or bank on one side will be
automatically reflected on the other.
Server Nbr
Clip pages and banks can be selected independently
on VGA and remote, but connecting to the clips of a
network machine or coming back to the clips of the
local machine on the VGA or Remote panel will
automatically reflect on the other.
4.11.10
PGM/PRV
M
ODE
Default: Enable
When this setting is enabled, the user has the possibility to select the
PGM/PRV mode on the LCD display as a function accessible from the A
button on the Remote’s main menu. Otherwise, the PGM/PRV mode
selection is not accessible from the A button.
4.11.11
M
APPING
N
ETWORK
C
AM
Mapping network cam p.6.3
[F1]Authorize cam mapping : Yes
Cam A
: Local
Cam B
: Local
[F3]Cam C
: CamA/01
[F4]Cam D
: CamB/01
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
This is a software option that allows mapping network trains to an unused
local camera position up to camera D. For more information on this option,
refer to the section 14.8 “Mapping network cameras”, on page 171.