3 recalling a playlist mode, 8 browsing quickly through a playlist, 9 how to name a playlist – EVS MulticamLSM Version 9.00 - March 2008 User's Manual User Manual
Page 145

EVS
Multicam - User Manual
Version 9.00
EVS Broadcast Equipment SA – March 2008
136
Note
A third selection of the PLST button cues the playlist to the
beginning, displaying the first clip on the PGM side and the
following clip on the PRV.
For more details on the Playlist Edit mode, refer to the section 13.1.11
“Functions Available on the Remote in Playlist Diffusion Mode”, on page
137.
13.1.7.3
R
ECALLING A
P
LAYLIST
M
ODE
When in Playlist Edit or Playlist Diffusion mode, you can recall a new
playlist by selecting the playlist bank (SHIFT + F10 on the remote), and
pressing the desired F_ key.
If the new playlist is empty, the system will ask you whether you want to
copy the current playlist at this new location. If the new playlist is not
empty, it is automatically loaded and becomes the current playlist.
13.1.8
B
ROWSING
Q
UICKLY
T
HROUGH A
P
LAYLIST
When the operator is neither in playlist nor in clip mode, pressing the
BROWSE key on the Remote panel automatically enters the current playlist
in Browse mode.
In this mode, the operator can quickly jump to the first field of each clip
inside the playlist by moving the jog dial. To return to the normal Playlist
Edit mode, press the BROWSE key again.
The operator can of course also activate the Browse mode directly from the
Playlist Edit mode.
13.1.9
H
OW TO
N
AME A
P
LAYLIST
Each of the 90 playlists can be named. On the Playlist screen, you will
notice that SHIFT + F1 shows «NAME PL».
1. Type the name on the keyboard.
The name will appear in the lower left corner of the VGA screen, next to
the Name label.
2. To validate the name, press SHIFT + F1.
The name of the playlist is shown in the centre of the title bar of the
VGA screen.