6 how to perform a ‘v base’ edit, 1 audio delay – EVS MulticamLSM Version 9.00 - March 2008 User's Manual User Manual
Page 155

EVS
Multicam - User Manual
Version 9.00
EVS Broadcast Equipment SA – March 2008
146
3. Press SHIFT + V Base (A).
4. Press to highlight A Fx Dur (C).
5. When you move the T-bar to adjust the value.
13.2.5
H
OW TO
S
ET THE
D
EFAULT
M
ODE FOR
E
XTENDING A
T
RANSITION
Whenever you make a Video or Audio Split, the transition originally set is
changed. In the setup menu, page 4.2, key F2, the default mode for
extending transition effects can be set:
Criteria Description
Center (on)
Cut
The transition is extended equally in both directions.
End (on) Cut
The transition is extended to the left, so that the end of the
transition is not changed.
Start (on) Cut
The transition is extended to the right, so that the start of
the transition is not changed
Ask
Asks the operator to choose one of the 3 options above
every time he edits a transition
13.2.6
H
OW
T
O
P
ERFORM
A
‘V
B
ASE
’
E
DIT
The audio can be advanced or delayed compared to the video IN/OUT points
of a clip in a playlist.
13.2.6.1
A
UDIO
D
ELAY
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press to highlight V Base (SHIFT+A).
4. Press to highlight A Delay (B).
5. Enter a value with the F_ keys including leading zeros
6. (0+2+1+2= 2:12), OR move the T-BAR and press ENTER.
The value entered will be present on the PRV SCREEN when the clip is next
to play in a playlist.