EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 148)

EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
139
13.1.13.1 I
NSERT
The Insert function allows the operator to insert a clip into the playlist. The
same operation can be achieved using the TAKE key.
13.1.13.2 S
PEED
The Speed function allows defining the speed at which one or all clips of
playlist will be played. Select the playback speed of the clip with the lever,
then press ENTER to validate. Values are ‘Unknown’ and from 0 to 100%.
Operators have access to the secondary lever control like when clips are
replayed. While editing the speed of a clip, pressing SHIFT+Lever on the
Remote allows to access the secondary lever speed defined in the menu.
13.1.13.3 FX D
UR
The FX Dur function sets the duration of the transition effect. The default
value that initially appears is determined by the value set in the Setup
menu. The effect duration will affect the transition at the beginning of the
selected clip. Use the lever to adjust the value, then press ENTER to
confirm.
13.1.13.4 E
FFECT
The Effect function is used to select the type of transition effect
(Mix/Wipe/Cut). Move the lever to set the type of effect, when Effect is
highlighted. Press ENTER to validate.
13.1.13.5 E
DIT
A
LL
Selecting this, followed by one of the playlist parameter option (speed,
effect, effect duration) will allow the operator to edit all clips in the list at
one time.
13.1.13.6 D
ELETE
The Delete function allows the operator to quickly edit a playlist by
removing the selected clip. The clip that has been «cut» can then be
inserted into another location. This clip is displayed on the second PRV
output. To insert it at another position in the playlist, simply go to that
position using the jog dial and press the INSERT key (or TAKE).