EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 195)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
186
Command Description
SYNC To synchronize the selected PGM with the other one. Press
this button and select the PGM to use as a reference.
Press the LEFT key to take control of the left side of the screen, and recall
the desired clip for this side. Use the command knob to search inside the
clip until the desired picture is reached.
Press the RIGHT key to take control of the right side of the screen, and
repeat the same operation with the clip you want to display on the right
side.
You can also shift horizontally the clips on both sides, so that the action is
in the centre of the picture.
Press the SHIFT key (D) to enter this mode. The menu will change, as
shown above.
Press the Å LF Æ key, and move the command knob to centre the left side
picture.
Press the Å RG Æ key and do the same operation for the right side
picture.
To restore the default positions, press CLEAR + Å LF Ж, Е RG Æ.
Press the Å WP Æ key allows moving the border. To restore the default
position of the border, press CLEAR + Å WP Æ.
To exit the SHIFT mode, press the SHIFT key (D) again.
If working in network mode, split screen can be performed on remote clips